What is the problem that should be paid attention to by antiseptic wood decoration balcony?
Anticorrosion wood to avoid sun exposure
The antiseptic wood sold on the market is usually pine wood, treated with preservatives. Anticorrosive wood moth, anti microbial attack, have certain water resistance. When we lay on the balcony, we must keep some space with the ground. There is a certain gap between the board and the board, so that we can keep the good ventilation of the antiseptic wood and make it convenient for sanitation. If something falls into the gap, it is also convenient for picking up.
Bijie anti-corrosion wood manufacturers believe that anticorrosive wood should be ventilated and should avoid sun exposure as much as possible. In addition, during construction, it is necessary to use the existing size of the preservative wood as far as possible. If we need to cut and drill, we must use CCA preservative to do the brushing and redress, so as to ensure the service life of the antiseptic wood.
Because the wood preservative is semi-finished products, to the rough part after spreading and wood moisture content below 20% and then polished it again. If you want to have a better effect, after cleaning the surface, can also be painted outdoor protective coatings (such as color protection coating should be fully stirred). In case of rainy days, it is best to avoid construction.
When the surface is painted with outdoor protective paint or paint, in order to achieve the best effect, we should avoid moving or heavy moving in 48 hours, so as not to destroy the protective film that has been formed on the surface of the antiseptic wood. If you want to get better anti - dirty effect, it is necessary to make a special outdoor wood oil treatment when necessary.
Bijie anticorrosive wood thinks that when building terraces, we should try to use long planks to reduce joints, for beauty. There are 5~10mm gaps between boards. Hot dip galvanized fasteners or stainless steel hardware should be used for all connections.